Custom Carpentry Atlanta | Built-Ins | Briarcliff Remodeling
Diamond pattern coffered ceiling with crown moulding built by Briarcliff Remodeling
Home › Custom Carpentry

Custom Carpentry and Built-Ins in Atlanta

Coffered ceilings, wine cellars, pantries, barn doors and built-ins. Measured on site, cut on site, built for the wall it lives on.

Custom work

If you can picture it, it can be built.

Coffered ceilings, wall panel moulding, wine cellars, pantries, barn doors, floating shelves, accent walls. The work that turns a house someone else built into a house that feels like yours.

This is the part of the job with no catalogue page and no model number. It gets measured on site, cut on site, and it fits the wall it was built for.

Dunwoody

An outdated bar became a wine cellar.

Part of a $75,000 whole-home renovation. The original was a 1980s oak wet bar tucked under the stairs with a laminate counter and a bar sink nobody used.

Finished custom wine cellar with diagonal lattice racking and a wine refrigerator Dated 1980s oak wet bar with laminate counter before renovation BeforeAfter

Dunwoody wine cellar

Built into the original bar footprint, glass door, diagonal lattice racking
Finished custom pantry with painted shelving and stained wood counter Custom pantry mid-build with unfinished plywood carcass and shelving In progressFinished

Custom pantry build

Old cabinets removed, corner returns built to fit the room
Racking in progress. Lattice cut and fitted on site to the exact opening
Racking in progressLattice cut and fitted on site to the exact opening
Glass door and oak surround. Framed into the existing panelling so it looks original
Glass door and oak surroundFramed into the existing panelling so it looks original
Build stage. Carcass, cooling, and lighting before the finish work
Build stageCarcass, cooling, and lighting before the finish work
Ceilings and trim

The work you only notice when you look up.

Coffered ceilings are the hardest trim carpentry in a house. Everything is overhead, every miter is visible from every angle, and there is nowhere to hide a gap. They also photograph better than almost anything else, because a ceiling has no clutter on it.

Panel moulding, wainscot, crown, and picture rail follow the same rule. Consistent reveals, tight miters, and paint that does not telegraph the joints.

Diamond pattern coffered ceiling with crown moulding Wall panel moulding with chandelier in a formal room
Built to fit

Shelving, doors, and built-ins

Barn door on a black track. Frosted glass, built from scratch, hung to clear the trim
Barn door on a black trackFrosted glass, built from scratch, hung to clear the trim
Laundry room shelving. Floating, level, and rated for what actually gets put on them
Laundry room shelvingFloating, level, and rated for what actually gets put on them
Coffered ceiling detail. Consistent reveals and tight miters overhead
Coffered ceiling detailConsistent reveals and tight miters overhead
LED-backlit accent wall. Stair-step diagonal, fabricated on site, lit from behind
LED-backlit accent wallStair-step diagonal, fabricated on site, lit from behind
Gallery installation. A front door that did not exist, built as an art piece for a charity event
Gallery installationA front door that did not exist, built as an art piece for a charity event
Backbar shelving. Commercial fit-out, built into the brick
Backbar shelvingCommercial fit-out, built into the brick

Got something in mind that nobody sells?

Text a photo of the wall and the picture you found. That is usually enough to start.

Text a photo
Questions
Do you design it, or do I need drawings?

Either. Most of this work starts with a photo the client found and a wall we have to make it fit. If a project needs real design, that runs $500 to $2,000 depending on scope, and most do not need it.

How much does custom carpentry cost?

It is quoted per project because a coffered ceiling and a set of floating shelves are not the same job. As a reference point, a whole-home renovation that included a custom wine cellar, two tiled fireplaces, and 600 square feet of great room tile came to $75,000 over two months.

Can you build something that does not exist yet?

That is most of this page. A gallery once asked for a front door that had never been built, as an art installation. It got built and it stood in the middle of the room all night.

Do you do built-ins around existing cabinetry?

Yes, and it is common. Removing dated cabinets and rebuilding the run with a proper pantry is one of the more satisfying jobs there is, and it usually costs less than a kitchen remodel.

Related: tile installation, commercial work, and what it costs.